Chlorine Measurement
This analyser has been designed to monitor Free Chlorine (Residual Chlorine) in drinking water, industrial cooling water, rinse water, wastewater or other fresh water samples containing Chlorine in the range of 0.05-20 ppm (High Range) or 0.01 to 5.00 (Low Range). With its plug-and-play design, our Free Chlorine Analyser includes a pH sensor, a chlorine sensor, a flow control device and a transmitter that is mounted on a PVC panel. It is calibrated at the factory before shipment.
- Reagent-less design that keep the ownership cost low without the need for costly reagents.
- Automatic Flow Control and Large Flow Tubes and Cells help in reducing clogs and blockages.
- Auto cleaning option to keep the chlorine clean from contaminates.
- Panel Mounted System Plug-and-Play Design.
- pH compensation eliminates additional chemicals.
- Amperometric Chlorine sensor precision.
- Compliant with EPA Method 334.0
| Specification | Details |
|---|---|
| Measurement Range | 0.05-20 ppm (Hight Range), 0.01 to 5.00 (Low Range) |
| Accuracy | (±)2% of calibrated range |
| Power Supply Options | 100 - 240 Vac / 24 Vdc |
| Analog Output and Digital Communication | Isolated 4-20 mA output and MODBUS® RTU |
| Contact Relays (Optional) | 3 x SPDT relays, can be configured as Alarm (set point) relays, timer activated relays or fault relays. |
| Transmitter Housing | Polycarbonate |
| Ingress Protection | NEMA 4X (IP66), Weatherproof |
| Display | 144 mm (H) x 144 mm (W) x 90 mm (D) |
| Chlorine Sensor | Polarographic, Gold cathode/Silver-Silver chloride anode, PTFE membrane |
| pH Sensor | Intelligent pH sensor to provide automatic compensation |
| Sample Requirement | 40 - 300 LPH |
| Sample Pressure | 0.1 - 2 Bar |
| Sample Inlet | ¼” NPT(F) |
| Sample Drain | ¾” NPT(F) |
- Chlorination of Municipal Drinking Water
- Cooling Towers
- Industrial Disinfection of Rinse Water (Food Processing, Pasteurisation Lines)
- Bleaching Processes
- Oxidation in Chemical Processing